Vehicles
57 not categorized PORSCHE CAYENNE HAT CAPCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.91436101202C Sold each. Size is 15x5.5 with a four lug pattern. These wheels were never factory equipment on a 914, but what a look, and very inexpensive! Wear as is or finish it off with a chrome hub cap. General Fitment914 1970-76
From $163.35
Make a selection 91451109110 Factory cable to release front hood or when cut shorter the engine lid (obviously two cables required per car. make sure that you thoroughly lubricate the cable before installation and periodically lubricate it to keep the lids from releasing hard. order a new hood cable release sheath as well and make sure that you have the end cap on the engine lid release tube. View/Change Diagram
From $22.50
Make a selection 91454217310S This excellent set of reproduction replaces the no longer available factory parts and is the plastic cap that fits at the rear top of the door and finishes off the squeegee. each easily installs with two screws, one of which holds the rear window guide channel. Set of left and right caps. General Fitment914 1970-76
$27.85
Make a selection 91454217410 This plastic part caps off the rear of the window at the back of the squeege and fills in that void where you wondered "what goes there?" easily installed with two screws, the inner one also secures the rear side window track. View/Change Diagram
From $8.80
Make a selection 91867A For over thirty years, the ignitor has proven itself in applications ranging from race cars to tractors. The ignitor replaces breaker point and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition system. The ignitor has been called the “stealth” ignition because of its quick installation and nearly undetectable presence under your distributor cap. General Fitment911 1965-69930 1975-77 911 1974-77 911 1970-73
$265.00
Make a selection 919108 Magnecor’s kv85 competition (8.5mm) and r-100 racing (10mm) ignition cables feature magnecor’s exclusive 2.5mm high capacity metallic inductance emi suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferrimagnetic core. The insulating jacket is made entirely of magnecor’s exclusive tc-1500-hs high strength aerospace grade silicone rubber, and its single layer construction will prolong the jacket’s insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources. General Fitment911 1974-77930 1975-77 911 1978-83
$331.10
Make a selection 92810604002B Application: all Porsche 928's made by 928 motorsports. General Fitment928 1978-82928 1983-86 928 1987-91 928 1992-95
$979.00
Make a selection 92810604002L Application: all Porsche 928's made by 928 motorsports. General Fitment928 1978-82928 1983-86 928 1987-91 928 1992-95
$878.00
Make a selection 92810604002N Application: all Porsche 928's made by 928 motorsports. General Fitment928 1978-82928 1983-86 928 1987-91 928 1992-95
$745.00
Make a selection 94410513100 This is the small plug next to the distributor cap that when removed, allows inspection of the cam belt timing mark View/Change Diagram
From $3.99
Make a selection 94410515704 Cam timing belt for all of the above captioned models. make sure that the timing marks are precisely aligned before installation or you will bend the valves and it is imperative to properly tension with a tension tool. View/Change Diagram
From $16.25
Make a selection 94460410300 The Bosch professional preferred remanufactured starters are built especially for extremes of heat, cold and high demand. Each unit is remanufactured (not rebuilt). the highest quality materials and the most technologically advanced processes are used to ensure premium performance. View/Change Diagram
From $232.84
Make a selection 95011691100 Sport driving demands the best products. That's why the sachs engineers have developed the sachs power clutch, a heavy duty clutch kit system with street manners and racetrack brawn. Features increased torque capacity designed for street use. Pressure plates are engineered with increased clamping force and the driving disc incorporate linings with increased coefficient of friction. Kit includes disc, pressure plate and throw out bearing. View/Change Diagram
$950.00
Make a selection 96412612102 This is a complete compressor that includes the magnetic clutch, suction / pressure connections and the valve inserts with caps. Please note: this fits 964 c2 and c4 models from 1993-1994 only, plus all 993 models. Sold individually. 1 necessary per car. View/Change Diagram
From $306.36
Make a selection 99363103100 Complete halogen headlight that includes a lens, gasket, h1 bulb, electric motor for headlight levelling, end cap, retaining bar and connector housing. It is complete and ready for installation. Sold individually. 1 necessary per car.
From $1,241.90
Make a selection 99363103200 Complete halogen headlight that includes a lens, gasket, h1 bulb, electric motor for headlight levelling, end cap, retaining bar and connector housing. It is complete and ready for installation. Sold individually. 1 necessary per car.
From $1,241.90
Make a selection 964604104X This part is a remanufactured part, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. If your starter is on its way out, you will notice an intermittent clicking noise and a delay in the vehicle actually starting. Eventually you hear a metallic screeching noise that is a sure sign that your starters bendix mechanism, bearings or solenoid are kaput. When ordering a new starter be sure to check the rubber cap on the terminal for cracks which allows moisture in ...(choose a part on the right to read more) General Fitment911 1994-98911 1989-94
From $250.59
Make a selection 99965900650 Boots and grommets for every occasion. Did you know that these were still available? The perfect protection and the perfect touch for your perfect 914 View/Change Diagram
From $4.07
Make a selection 996TTHDR Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles. General Fitment911 TURBO/GT2 2001-05
$1,348.65
Make a selection A2033 The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 325mm versus 298mm providing greater braking force and cooling capacity. General Fitment911 1998-05911 2005-08
$1,485.00
Make a selection A1103 The girodisc system is a direct replacement for the oe disc. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. General Fitment911 1989-94
$1,350.00
Make a selection A1122 The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 340mm providing greater braking force and cooling capacity. The girodisc front rotors are approx 21.0 lbs vs. 24.4 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. General Fitment911 2009-12
$1,620.00
Make a selection A1126 The girodisc system is a direct replacement for the oe disc on all 997.2 GT3/gt2's, with or without the OEM pccb rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. General Fitment911 TURBO/GT2 2007-09911 GT3 2007-11 911 TURBO/GT2 2010-13
$2,160.00
Make a selection A2032 The girodisc system is a direct replacement for the oe disc on all 997.1 GT3/gt2's, both pccb and non-pccb equipped vehicles. General Fitment911 TURBO/GT2 2001-05911 GT3 2007-11 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 2009-12 911 1998-05 911 2005-08
$1,620.00
Make a selection 95134379330 Measure your sway bar with an open ended metric wrench before ordering as these bushings come in different sizes as noted. the above captioned fit in the outer sway bar link where it attached to the bar. usually these last a long time as it is the inner bushings, especially the one that is under the leaking power steering pump, that takes the abuse. View/Change Diagram
From $7.75
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |